Log in
What is CBD Liquid?
CBD liquid is a product designed to inhale CBD like an e-cigarette. It comes in a wide variety of concentrations and flavors, and can be enjoyed as a leisure product or used as a substitute for cigarettes by many people. Since it requires a device, it can be a little difficult for beginners, but Skew also offers a beginner's set .
table of contents
- How to use CBD liquid: Cartridges
- How to use CBD liquid: Bottles
- FAQ
How to use CBD liquid: Cartridges
CBD cartridges can be inhaled simply by inserting the cartridge into a dedicated device (battery/vaporizer). The way to use a vaporizer varies depending on the manufacturer, so please check the operating instructions of each manufacturer. By the way, the skew vaporizer automatically turns on when you insert the cartridge and inhale. It is recommended because it is easy to use.
-
Insert the cartridge into the vaporizer. If it has crystallized, we recommend melting it before inserting it.
Reference article: [With pictures] What causes CBD liquid to crystallize and how to dissolve it
-
Turn on the vaporizer and adjust the temperature to your liking. Set the temperature and wattage to around 160 to 200 degrees.
- Inhale. Some devices only heat for as long as you hold down the button.
How to use CBD liquid: Bottles
The only thing you need to do with liquid bottles is to pour them into a cartridge or atomizer, otherwise they are the same as cartridges. Bottles tend to have larger quantities and are often more economical to smoke, so they are recommended for those who value cost performance.
-
Shake the bottle
First, shake the bottle well to ensure that the CBD ingredients are evenly distributed. CBD liquid can be made more concentrated by adding CBD crystals (sold separately), but in that case, be sure to shake it carefully.
-
Add liquid
Next, pour the CBD liquid into the tank of the atomizer. To keep the liquid fresh, it is best to only pour in the amount you want to use.
-
Set the heating temperature
Some vaporizers (batteries) have temperature settings. Set the temperature and wattage to around 160 to 200 degrees.
By the way, the skew vaporizer automatically turns on when you insert the cartridge and inhale. It's easy to use, so I recommend it. However, the so-called explosive smoke type is often too hot and is not suitable for using CBD liquid.
-
Heat and suction
Now it's time to inhale. Turn on the device to heat it up and inhale the vaporized liquid. When inhaling, try to hold your breath slowly in your lungs. This will increase the absorption rate of CBD by keeping it in your lungs for as long as possible.
One thing to be careful of is not to inhale too quickly. If you inhale every time you inhale, the liquid will not be able to keep up with the heating part and will burn. This can destroy the CBD ingredients or simply make it taste bad.
FAQ
■ How much CBD liquid should you inhale? How many seconds should you inhale?
It depends on the concentration, but about 5 puffs are enough for one use. 1-2 seconds is also enough for the number of seconds you inhale. Inhaling for longer than that can cause choking. Once you get used to it, try adjusting it yourself.
■ I end up choking. How can I smoke without choking?
It is recommended to take a mouthful into your mouth and then breathe through your mouth. This is called mouth-to-lung, and allows you to dilute the liquid with the vapor before inhaling. Even if you are a smoker, if you inhale deeply at first, you will choke, so take your time and inhale slowly until you get used to it.
■ Can I smoke CBD oil?
Depending on the ingredients, you may be able to smoke it, but it doesn't taste good, so we don't recommend it. Conversely, you should avoid drinking the liquid.